6
12
Mark and prepare two holes for end cap bracket.
Prepare holes after lock side of device is mounted and
hinge side is leveled.
c
b
a
SURFACE MOUNT
#25
#10-24
W
OOD MET
AL
W
OOD MET
AL
¹⁄₈
” (3 mm) x 1” (25 mm) Deep
¹³⁄₃₂
” (10 mm) Drill Thru
SEX BOLTS
¹⁄₄
” (6 mm) Device Side
¹³⁄₃₂
” (10 mm) Trim Side
OR
13
Install end cap bracket and end cap.
14
Adjust latch bolt.
Adjustment screws
Adjustment fi nger
Pushbar
TOP VIEW
Latch bolt
³⁄₄
” (19 mm)
Loosen adjustment screws and adjust fi nger in or out
until latch bolt is fully retracted (with pushbar down)
and fully extended
³⁄₄
” (with pushbar up).
15
Install center case cover.
Remove protective
fi lm from pushbar
