Volvo VAH 2013 Скачать руководство пользователя страница 129 | Manualshive

Страница: 129 / 175

Volvo VAH 2013 Скачать руководство пользователя страница 129

Operator's Manual Vehicle Maintenance

VN, VHD 125

Wiring Harness/Cable and Connector Protection

To help protect your vehicle's external high amperage electrical cables and connections
from corrosion due to the effects of newer salts (calcium chloride and magnesium
chloride) on the roadways.
VOLVO recommends coating all high amperage (positive and ground) exposed
electrical connections at a minimum of every 6 months or, whenever the connector has
been disassembled. The following list contains the recommended connections that
should be liberally coated with the corrosion inhibitor;

•

Battery connections

•

Battery main shut off switch connections

•

Maxi and/or Mega fuse connections

•

All ground stud connections

•

Electrical pneumatic pass-thru connections

•

All alternator connections

•

All starter connections

•

Intake preheater and preheater relay connections

•

Electrical power inverter connections

•

EFRC

•

Ground studs on the cab firewall

All connections should be cleaned and free of previously applied inhibitors, oil, dirt,
dust or other contaminants prior to application. Allow time for the product to dry
before use (drying time may vary depending temperature, humidity, etc.).

Lighting

WARNING

Using incorrect bulbs or lamps may result in failures that could lead to a fire or a
vehicle accident caused by improper lighting.

Check all lights on the vehicle daily for proper function. Replace burned out inserts
and bulbs. Replace any broken or cracked side or rear reflectors. Headlights should be
checked for aim at least once per year.

«
...
127
128
129
130
131
...
»

Содержание VAH 2013
















































































































































































Отзывы:

Нет отзывов