Volvo VAH 2013 Скачать руководство пользователя страница 100 | Manualshive

Страница: 100 / 175

Volvo VAH 2013 Скачать руководство пользователя страница 100

96

Operator's Manual Vehicle Maintenance VN,

Exhaust Aftertreatment System

DANGER

The SCR/DPF shield should not be
removed while the vehicle is in use.
Also, only remove the shield, once the
vehicle is out of use and the SCR/DPF
is sufficiently cooled. Failure to follow
these instructions can result in fire,
which can cause component damage,
personal injury or death.

CAUTION

The Diesel particulate filters and their
components,

can not

be moved or

altered from the OEM installation in
any fashion. Any alterations may cause
component damage and is prohibited by
the law.

Check if the vehicle is equipped with a Diesel Particulate Filter (DPF) or a DPF
and Selective Catalytic Reduction unit (SCR). These components are part of the
overall vehicle emissions control system. In normal operation, these components can
experience surface temperatures as high as 350° C (662° F). It is important to verify
the temperature at which the material or substance in, or associated with, the body can
ignite. If it is possible for the material or substance to fall or leak from the body, take
steps to prevent them from contacting or collecting on the DPF or SCR. Failure to
do so may result in fire.

It is important to note that additional shielding may, depending upon conditions and
the material or substance, trap flammable substances between the additional shield
and the DPF/SCR. If this condition can develop, advise the user of the vehicle to
periodically check to ensure there are no trapped substances.

Note: The DPF/SCR and associated components are part of a U.S. EPA and
California Air Resources Board (CARB) certified engine emissions system. These
components must not be moved, altered or modified in any way. Tampering with
these systems render the emissions warranty void and may result in possible
tampering charges by the EPA or CARB.

«
...
98
99
100
101
102
...
»

Содержание VAH 2013
















































































































































































Отзывы:

Нет отзывов