Volvo V90 2019, Руководство пользователя

Страница: 309 / 674

DRIVER SUPPORT
}}
* Option/accessory. 307
To reactivate ACC from standby mode:
–
Press the steering wheel button (1).
> The speed is then set to the most recently
stored speed.
WARNING
A significant increase in speed may follow
when the speed is resumed with the
steering wheel button.
Related information
• Adaptive cruise control
*
(p. 302)
•
Activating and starting adaptive cruise con-
trol
*
(p. 304)
•
Change between cruise control and adaptive
cruise control
*
(p. 307)
Limitations for adaptive cruise
control
*
Adaptive Cruise Control (ACC
42
) may have limi-
tations in certain situations.
Steep roads and/or heavy load
Bear in mind that the adaptive cruise control is
primarily intended for use when driving on level
road surfaces. The function may have difficulty in
keeping the correct distance from the vehicle
ahead when driving on steep downhill slopes - in
which case, be extra attentive and ready to brake.
•
Do not use adaptive cruise control if the car
has a heavy load or a trailer is connected to
the car.
Miscellaneous
• Drive mode
Off Road
cannot be selected
when the adaptive cruise control is activated.
NOTE
This function uses the car's camera and radar
units, which have certain general limitations.
Related information
•
Adaptive cruise control
*
(p. 302)
•
Limitations for camera and radar unit
(p. 333)
Change between cruise control and
adaptive cruise control
*
In a car with Adaptive Cruise Control (ACC
43
)
the driver can change between Cruise Control
(CC
44
) and ACC.
A symbol in the driver display shows which cruise
control is active:
CC ACC
A A
Cruise control Adaptive cruise control
A WHITE symbol: Function active, GREY symbol: Standby mode
Changing from ACC to CC
Proceed as follows:
1. Set adaptive cruise control to standby mode
using steering wheel button .
42 Adaptive Cruise Control
43
Adaptive Cruise Control
44 Cruise Control