Volvo V 90 Cross Country, Руководство пользователя

Страница: 380 / 594

||
DRIVER SUPPORT
* Option/accessory. 378
Positioning the car in the parking space
Parallel.
Perpendicular.
1. Move the gear selector into the D position,
wait until the steering wheel has been turned
and drive slowly forward
2. Keep an eye on the centre display - be pre-
pared to stop the car when the graphics and
message so request.
3. Select reverse gear and drive slowly back-
wards.
4. Keep an eye on the centre display - be pre-
pared to stop the car when the graphics and
message so request.
The function is deactivated automatically and the
graphics and message show that parking is com-
plete. It may be necessary for the driver to correct
the car’s position. Only the driver can determine
whether the car is properly parked.
IMPORTANT
The warning distance is shorter when the
sensors are used by PAP compared with
when Park Assist uses the sensors.
Leaving a parking space
NOTE
When leaving a parking space, the Park Out
function must only be used for a parallel-
parked car - it does not work for a perpendic-
ular-parked car.
The Park Out function is acti-
vated in the centre display's
function view.
1. Tap on the Park Out button in function view.
2. Use the direction indicator to select the
direction in which the car should leave the
parking space.
3. Keep an eye the centre display. follow the
instructions in the same way as during park-
ing.
Note the steering wheel can "spring" back when
the function is completed - the driver may then
need to turn the steering wheel back to the maxi-
mum steering angle in order to leave the parking
space.
If PAP considers that the driver can leave the
parking space without any extra manoeuvring
then the function will be stopped, even if the
driver may consider that the car is still in the
parking space.
Related information
•
Park Assist Pilot
*
(p. 374)
•
Limitations of Park Assist Pilot
*
(p. 379)
•
Messages for Park Assist Pilot * (p. 381)