Volvo TAD1240GE Скачать руководство пользователя страница 32

Страница: 32 / 68

Maintenance

Anti-freeze

If there is a risk of frost, use a mixture of

% Volvo

Penta anti-freeze (glycol) and water (to ASTM
D4985). This mixture prevents against frost bursting
down to about –

°C (–

°F), and should be used all

year round.

IMPORTANT! Even if the temperature never
gets as low as -

°C these mixture proportions

should be used to insure sufficient corrosion
protection. See the table below.

Mix glycol with water in a separate container before
filling the cooling system.

WARNING! Glycol is a health hazard (dangerous
to ingest).

IMPORTANT! Alcohol may not be used in the
cooling system.

Anti-corrosion mixture

When there is never a risk of freezing water (accor-
ding to ASTM D4985) mixed with Volvo Penta corrosi-
on protection may be used as coolant.

We recommend however that an anti-freeze mixture of
40% be used year-round, even in frost-free climates.

Mix according to the instructions on the package.
Operate the engine until it is warm after filling to prov-
ide the best possible performance.

If the time of operation exceeds 400 hours per year
the coolant’s anti-corrosion protection must be rep-
lenished by use of 1/2 liter of corrosion protection eve-
ry 400th operational hour.

WARNING! Corrosion protection is a health
hazard (dangerous to ingest).

IMPORTANT! Never mix corrosion protection
with anti-freeze (glycol). Foaming can occur
which can seriously impair cooling.

Содержание TAD1240GE





































































Результаты поиска

Содержание TAD1240GE

Отзывы:

Похожие инструкции для TAD1240GE

Бренды по названию

Популярные бренды

Volvo TAD1240GE, Руководство оператора

Результаты поиска

Содержание TAD1240GE

Отзывы:

Похожие инструкции для TAD1240GE

Бренды по названию

Популярные бренды