Standard
STD 101-0001
Volvo Group
Version
4
Page
20
•
Upon selection of a datum indicator, the datum target indicators which have the same
datum letter shall be highlighted or otherwise distinguished from other entities on the
display, see figure 18.
Visual response
Query
Visual
response
Figure 18 – Queries for supplemental geometry
e)
Supplemental geometry used in the definition of annotations, appropriately highlighted or
otherwise from other entities on the display.
f)
Identification of all elements of an associated group, appropriately highlighted or otherwise
distinguished from other entities on the display, through the selection of any one element.
4.4 General notes and local notes
4.4.1 Model
requirements
When a requirement of a particular type is generally applied or applicable to features not associated to another
requirement of the same type, a
general note
can be stated and placed in a notes-annotation plane
(corresponding to text space of a drawing) that does not rotate with the model. This annotation plane shall be
available for display with the model.
Example:
UNLESS OTHERWISE STATED
2 A B
When special requirements apply to one or a few digital elements or areas of the modelled part, but are
unsuitable to specify in a model-annotation plane, a reference symbol, e.g. 1), A), symbol, etc. shall be placed in a
model annotation plane and repeated in the notes-annotation plane (text space) along with the applicable
requirement. These notes are called
local notes
.
Example
MATING SURFACES
General notes do not require associativity. General notes may include general tolerances for
the entire model. Local notes shall be associative to applicable digital elements in the model.
1 XYZ
