Volvo SDLG LG918 Скачать руководство пользователя

Страница: 47 / 113

Operation & Maintenance Manual

──

LG918 Wheel Loader

dirt and oil can erode a tire. No light, heat insulation or ventilation are needed for storage. Cover

the tires with a canvas, plastic or other anti-dust cloth. The wrong storage method can greatly

reduce the quality and life of tires.

Stand the tire on level ground and use a wedge to lock it to prevent it falling down. The quality

may be reduced if the tire is laid on its side. The tire should be rotated (90

) once per month at

least.

Please stand aside if a tire starts to fall down.

Never

try to hold a tire since the tires for

engineering mechanisms are generally very heavy, and you may be seriously hurt.

8.20 Waste Materials

Do as follows to prevent pollution:

Never

dump waste oil under ground or into the river.

Contain the oil vented from the machine in a container;

never

dump the oil directly onto the

ground.

Obey the relative rules and laws when dealing with harmful materials such as grease, fuel,

coolant, solvent, filter and storage battery.

9 SAFETY TRANSPORTATION

9.1 Assemble and Disassemble the Machine

Keep the engine speed low during loading and unloading the machine.

Load and unload machine on level ground and remain at a safe distance off the road.

Secure the tires well during loading and unloading the machine to make sure it will not move. Put

a cushion under the gangway.

Slope boards should be strong enough with sufficient length and width to form a safe slope. The

angle with the ground should not be larger than 15

. Keep a safe distance between slope board

and board, board and machine.

Make sure the height of the two sides of the board is uniform to ensure firm orientation.

Keep the board surface clean, free of lubricant, oil, ice and loose materials. Clean the dirt off the

tires.

Never

turn around on the slope board. If it is necessary, turn outside the board and then drive

Содержание SDLG LG918


















































































































Результаты поиска

Содержание SDLG LG918

Отзывы:

Похожие инструкции для SDLG LG918

Бренды по названию

Популярные бренды

Volvo SDLG LG918, Руководство по эксплуатации и техническому обслуживанию

Результаты поиска

Содержание SDLG LG918

Отзывы:

Похожие инструкции для SDLG LG918

Бренды по названию

Популярные бренды