Volvo S 90, Руководство пользователя

Страница: 249 / 548

DRIVER SUPPORT
}}
* Option/accessory, for more information, see Introduction. 247
Roll stability control (RSC)
Volvo's Roll Stability Control (RSC) is a stability
system designed to help minimize the risk of a
rollover in emergency maneuvers or if a skid
should occur.
RSC uses a gyroscopic sensor that registers the
amount of change in the lateral angle at which
the vehicle is leaning. Using this information, RSC
calculates the likelihood of a rollover. If there is
an imminent risk of a rollover, the stability system
is activated, power to the engine is cut and the
brakes are applied to one or more of the wheels
until the vehicle regains stability.
WARNING
The vehicle’s stability systems, including RSC,
do not replace the driver’s responsibility for
operating the vehicle in a safe manner. Speed
and driving style should always be adapted to
the current road, traffic and weather condi-
tions. Posted speed limits should always be
respected.
Related information
•
Electronic Stability Control (ESC) (p. 243)
•
General safety information (p. 56)
Speed limiter (SL)
*
The Speed Limiter (SL) is a feature that helps
prevent the driver from exceeding a preset maxi-
mum speed.
Overview
Function buttons and symbols (generic illustration)
SL switches from standby mode to
active mode and the set maximum speed will
be used
Increases the set maximum speed
From standby mode
, press to put SL
in active mode and set the current speed as
the maximum or
from active mode
, press to
put SL in standby mode (the set maximum
speed can be exceeded)
—
Decreases the set maximum speed
Set maximum speed indicator
The vehicle's current speed
The set maximum speed
WARNING
•
The Speed Limiter cannot cover all driv-
ing situations and traffic, weather and
road conditions.
•
The vehicle must always be driven
according to current traffic/road condi-
tions.
•
The driver must take action if SL does not
maintain the set maximum speed.
•
The driver is always responsible for oper-
ating the vehicle in a safe manner and
observing posted speed limits.
Limitations
On steep downslopes, the Speed limiter's braking
capacity may not be sufficient and the set maxi-
mum speed may be exceeded. If this happens,
Speed limit exceeded
will be displayed in the
instrument panel to alert the driver.
This message will appear if the set maximum
speed is exceeded by more than approx. 2 mph
(3 km/h).