Volvo RTI, Быстрое руководство

Страница: 42 / 88

03 Planning your trip
Specify a destination
03
40
Address
Set destination Address
There are several different ways to program a
destination.
It is sufficient to simply specify a district/city
and start the journey - it leads to the centre of
the district/city.
If a destination's latitude and longitude are
known then these can be entered.
See page 25 for information on how charac-
ters are written/entered into the system's var-
ious text fields.
NOTE
The definition of city or area may vary from
country to country and even within the
same country. In some cases, it refers to a
municipality and in others it refers to a dis-
trict.
City or street
The cursor first rests on Street .
How to search and locate a destination:
1. With the previous image view on the dis-
play screen - Press
OK
to activate the
preset text box.
2. Enter the street's name
Street:
with the
"daisy wheel" (see page 25) and then
select a desired
City:
.
3. Or
City:
+ OK and start by entering it.
The following search criteria can be used:
•
Area: - Enter a country.
•
City:
- Enter a district/city.
•
Postcode:
- Under
City:
the search can
also be made using a post code.
•
Street:
- Enter the street address.
•
Number:
- Select one of the street's
house numbers.
•
Junction:
- Select a destination based on
where the two streets/roads intersect.
•
Set single destination
- Deletes any
destinations in the itinerary and starts
guidance to the current destination.
•
Add as waypoint - OK to add
the address to the itinerary.
•
Information
-
OK
to view infor-
mation about the selected destination.