Volvo L20B, Руководство пользователя

Страница: 37 / 110

Indicators and control elements
Levers and switches 35
Heating - engine dependent
7 Blower switch, 3-steps
8 Temperature regulator
Heating operation
– Turn the temperature regulator (8) to the desired position.
– Set the blower switch (7) to one of the three possible stages.
– Open the intake opening (A) for circulation air operation.
The air distribution is controlled by adjusting the air discharge noz-
zles (B).
The best warming effect in the cabin is achieved with the highest
blower step. Temperature control at highest stage and intake
opening for circulation air operation opened.
Fan operation
– Turn the temperature regulator (8) to the desired position.
– Set the blower switch (7) to one of the three possible steps.
– Intake opening (A) for circulation air operation closed.
The air distribution is controlled by adjusting the air discharge noz-
zles (B).
The air intake for cabin heating and fresh air is equipped with a
dust filter located at the front trim outside the cabin.
Note:
The maintenance intervals for the filter depend on the amount
of dust in the air and can therefore not be determined pre-
cisely. The filter mat can be washed out if soiled.
– Unscrew the covering hood (arrow).
– Pull the filter out and wash it out or replace it.
M200040A
8 7
M200041A
B
A
M200042A