1
Sling 12 metre (40 ft)
2
Shackle 16 mm (0.630 in), 4 pcs
3
E 616
14. Connect a hoist to the front axle and remove the attaching bolts.
Required lifting capacity approx. 600 kg (1323 lb). Lower the axle on E 616 and pull out the axle housing.
15.
Figure 4
1
Hook spanner or angled lock ring pliers
16. Remove the lock screw and screw in the diaphragm sleeve sufficiently far so that the dog clutch half will clear the
differential bearing cap.
17. Remove the differential from the axle housing.
Weight approx. 200 kg (441 lb).
18.
Figure 5
Removing differential carrier assembly
1
2628
19. Clean the differential and the axle housing contact surfaces.
Fitting
20. Apply sealing compound (silicone) to the axle housing sealing surfaces and fit the differential carrier assembly.
Tighten the bolts to 350 N m (258 lbf ft).
21. Position the axle housing on E 616 and roll it in under the machine.
Lift and secure the axle housing against the frame.
Tighten the bolts to 1170 N m (863 lbf ft).
