Check that the O-ring is not twisted or lies in waves.
24.
Figure 7
1
O-ring
2
Support ring
3
Slide ring
25. Lubricate the O-ring with a soap solution.
Press the slide ring into position by hand, see
.
Figure 8
Remove the support ring with the aid of the tape tab.
Check that the O-ring is not twisted or lies in waves and that the slide ring is positioned at right angles to the axle.
26. Adjust the discs so that the teeth align before assembling. Position the wheel hub on the axle, see
.
Figure 5
NOTE!
Make absolutely certain that the hub is fitted at right angles to the axle so that the oil seals are not damaged or
positioned obliquely.
27.
Figure 8
Pressing in slide ring
1
Slide ring
2
Tab of tape
3
Plastic hose
4
O-ring
28.
Figure 9
1
Bolt M14 length approx. 90 mm
