Volvo DD29 Скачать руководство пользователя страница 52

Страница: 52 / 172

SECTION 4

OPERATING INSTRUCTIONS

4-2

DD-29/31HF/38HF Vibratory Asphalt Compactors

OPERATING INSTRUCTIONS

If you are not experienced with the machine’s operation and control, before operating the
machine, read and understand Section 3, OPERATING CONTROLS AND INSTRUMENTS.

WARNING

Unexpected machine motion or moving parts can cut or crush.

Install the articulation lock bar, apply the parking brake and shutdown the
engine before working on the machine.

WARNING

Improper maintenance can cause severe injury or death.

Read and understand Section 1, SAFETY which contains safety
precautions and guidelines before you perform any maintenance, service
or repairs.

GENERAL INFORMATION

Observe the following Operational procedures:

•

Do not speed engine when it is cold.

•

Always chock the drum/wheels when parking the machine.

•

Do not grease the machine while the engine is running.

•

Always perform safety checks prior to starting/using the machine.

•

Do not control travel speed using the High/Low engine speed switch.

•

Do not shift speed range selector at speeds above 5 km/h (3 mph).

•

Always operate the machine at full engine speed when compacting or traveling the
unit.

•

Never operate the machine across slopes. Travel up and down slopes.

•

On machines equipped with a Rollover Protective Structure (ROPS) wear seat belt
at all times.

Содержание DD29













































































































































































Результаты поиска

Содержание DD29

Отзывы:

Volvo DD29, Руководство оператора, Страница: 52 / 172

Результаты поиска

Содержание DD29

Отзывы: