manualshive.com logo in svg

Volvo DD29, Руководство оператора, Страница: 48 / 172

Поделиться
Скачать
Volvo DD29 Скачать руководство пользователя страница 48

SECTION 3

OPERATING CONTROLS AND INSTRUMENTS

3-6

DD-29/31HF/38HF Vibratory Asphalt Compactors

Indicator Lights

The indicator lights (7) consist of two separate lights. A battery condition light and a check 
engine light. The battery condition light turns ON when there is a problem with the battery. The 
Check Engine Light turns ON whenever the ignition key is turned to the ON position to indicate 
that the system is operating correctly. The light will also turn ON if the engine has low oil 
pressure or high engine coolant temperature. If the Check Engine Light comes on during 
machine operation, shutdown the engine immediately and have service personnel determine 
the cause of the fault.

Brake Test Switch 

The Brake Test Switch (8) is a momentary switch that allows the operator to test the operation 
of the Park Brake.

Park Brake Switch 

This switch (9) turns the park brake ON and OFF.

Horn

Press the horn button (10) to sound the horn and alert personnel to the approaching machine 
or when changing direction.

Ignition Switch 

This four-position switch (11) controls glow plug warm up engine starting, running, and 
stopping.

Water Flow Control 

This Water Control lever (12) allows the operator regulate the amount of water that is supplied 
to the drums.

Содержание DD29













































































































































































Отзывы:

Нет отзывов