Volvo 31664479, Инструкция по установке, Страница: 9 / 30

Charging station
en-GB
Installation
Step 1
– Use the stud sensor to find the wall
stud.
– Mark the centre of the stud.
For installation on concrete wall/masonry
wall, skip to step 2
Step 2
– Measure and mark a point on the wall
1.14 m (45") from the floor.
Step 3
– Use the spirit level to ensure the wall
bracket is mounted horizontally.
– When mounting to a stud, mark the
three vertical holes with the middle hole
(A). Use 5.5 mm (7/32") drill bit to drill
three holes along the stud's centre line.
– For wall mounting, mark the four holes
in the corners of the bracket. Use a
suitable drill bit to drill the four holes.
7