Volvo 31664479, Инструкция по установке, Страница: 8 / 30

en-GB
Charging station
Preparations
Caution!
The charging station must be installed
by an authorised electrician. The
installation must follow the regulatory
authorities' regulations and local
regulations for electrical installations.
Note!
Hand this mounting instruction to the
owner of the charging station for future
reference.
– Switch off the central electrical unit's
main switch before starting the
installation of the charging station.
– The installation must be performed
by an authorised electrician. The
installation must follow local regulations
for electrical installations in the country
where the installation is being carried
out.
Maximum current
in the charging
station Overvoltage
protection (circuit
breaker)
16 A 20 A
Before installation, check mains power
requirements and disconnect the current.
Prepare the mounting location for the
charging station.
– The charging station should be
mounted as close to the circuit breaker
as possible.
– The area around the installation
location should be free from waste and
debris.
– Do not install the charging station near
to a heat source (oven, water heater
etc.).
– Mount the charging station against a
smooth and stable part of the wall.
– Keep these mounting instructions for
future reference.
Note!
Ensure that the circuit breaker and
cross-section area of the cables
correspond to local regulations.
Cables with larger cross section area
(lower AWG) may be necessary in
some regions.
Before installation, collect together all the
necessary parts and tools.
6