30
IMG-268034
Screw the right-hand screw fully in the camera.
Align the template so that the right-hand hole in the template is
directly above the right-hand hole in the lid.
Hold the template in position (inside the hole in the trunk lid)
and, at the same time, tighten the camera's right-hand screw so
it holds.
Align the left-hand holes with each other, fit the screw and
tighten the camera.
Cable routing
31
IMG-268035
Cable routing
Remove the clamp in the rubber grommet and carefully pull the
rubber grommet from the mounting in the car body and trunk lid.
Installation instructions, accessories
Volvo Car Corporation Gothenburg, Sweden
© Volvo Car Corporation
Parking assistance, camera, rear. For Sensus Connect- 31428626 - V1.1
Page 18 / 56