61
IMG-331356
Applies to the right-hand side
Ensure that the marking on the hole tool (RH) and the marking that
was made on the bumper cover are opposite each other.
Note!
Ensure that the support sleeve does not turn when the screw
is tightened.
62
IMG-331361
Clean the inside of the bumper cover using a mild soap solution.
Clean an area around the holes that is slightly larger than the
sensor holder. Use isopropanol. Allow to dry.
63
IMG-297553
Clean using isopropanol.
Installation instructions, accessories
Volvo Car Corporation Gothenburg, Sweden
© Volvo Car Corporation
Parking assistance, rear- 31201126 - V1.4
Page 28 / 40
