58B
IMG-331348
59
IMG-331360
Use: 9997367 Hole tool
Ensure that the markings, 1 and 2, are opposite each other when
making holes.
Caution!
Place the hole tool's support sleeve on the inside, and the
cutting part on the outside of the bumper casing.
60
IMG-331355
Applies to the left-hand side
Ensure that the marking on the hole tool (LH) and the marking that
was made on the bumper cover are opposite each other.
Note!
Ensure that the support sleeve does not turn when the screw
is tightened.
Installation instructions, accessories
Volvo Car Corporation Gothenburg, Sweden
© Volvo Car Corporation
Parking assistance, rear- 31201126 - V1.4
Page 27 / 40
