4
IMG-217442
Fold the steering wheel module out.
Remove the two connectors (1) for the ignition cables for the
airbag. First press in the catches on the sides. Then pull the
connectors straight out.
Note!
The connectors are tightly secured. However, tools must not
be used when removing.
Place the steering wheel module to one side.
Warning!
Position the steering wheel module with the front upwards in a
secure position while carrying out the work.
5
IMG-217520
Applies to vehicles without pre-drawn wiring harness
Remove the left and right keypad dummy from the steering
wheel by carefully prying it off using a plastic weatherstrip tool.
Twist the weatherstrip tool to pry them out. They are firmly held
in place by three lugs in the steering wheel, so some force is
required to remove them.
Unplug the connector and put the left keypad dummy aside. It
will not be reinstalled.
Applies to vehicles with pre-drawn wiring harness
Remove the left keypad/keypad dummy as described above. Put
it aside. It will not be reinstalled.
Installation instructions, accessories
Volvo Car Corporation Gothenburg, Sweden
© Volvo Car Corporation
Cruise control- 30739998 - V1.1
Page 8 / 13
