10
IMG-222888
Insert the ignition cables in the holder (1).
Position the horn ring in the steering wheel.
Install the three screws (2) in the horn ring. Tighten the screws
to 8±2 Nm (6 ±1.5 lbf.ft.) in a crisscross pattern.
Note!
The screws are self tapping which may mean that it is difficult
to screw in.
Check the function of the horn by press the horn around its
entire circumference. A metallic noise should be heard when the
three contact points come into contact.
11
IMG-222920
Plug in the connector for the keypad/keypad dummy on the right
and left side and press them into the steering wheel.
Installation instructions, accessories
Volvo Car Corporation Gothenburg, Sweden
© Volvo Car Corporation
Cruise control- 30739998 - V1.1
Page 11 / 13
