
70
M3702543
Reinstall the black switch in the connector. Lock into place using
the catch.
Press the connector into the accessory electronic module.
Secure the connector using the black lock handle.
Reinstall the accessory electronic module (AEM). Secure any
excess wiring.
Reinstall the lock facing above the accessory electronic module
(AEM). Tighten the screw. Tighten to 10 Nm (8 lbf.ft.).
Installing the hands free box
71
M8503612
Installing the hands free box
Hint
Install the aerial according to the separate Installation
Instructions.
Tip the driver's seat back slightly.
Position the hands free box and the bracket with the mounting
over the screw hole in the right front mounting for the driver's
seat.
Fold the seat down towards the mountings. Check that the
hands free box bracket is positioned under the seat rail.
Route all excess cable in under the carpet.
Note!
Ensure that no wiring is trapped.
Tighten the front edge of the seat using two new screws from
the kit. Tighten to 40 Nm (30 lbf. ft.).
Installation instructions, accessories
Volvo Car Corporation Gothenburg, Sweden
© Volvo Car Corporation
Hands free unit for carphone- 30730011 - V1.1
Page 42 / 45