
15
M8903275
Press the bracket against the mating surfaces where the three
holes are to be drilled.
Hold the bracket firmly in place. First drill the two marked holes
through the bracket and the dashboard. Use a Ø5 mm (13/64")
diameter drill bit. Use a Ø25 mm (1") diameter drill stop.
16
M8901571
Insert the bracing plate (1) through the hole in the dashboard.
Secure the bracket (2) using two screws (3) from the kit while
pressing the bracket against the mating surfaces.
Tighten the screws so that the bracket is pressed into and is at
the same level as the dashboard face.
Drill out the last hole. Use a Ø5 mm (13/64") diameter drill bit.
Insert the bracing plate (5) through the hole in the dashboard.
Secure the bracket using a screw (4) from the kit.
Installation instructions, accessories
Volvo Car Corporation Gothenburg, Sweden
© Volvo Car Corporation
Hands free unit for carphone- 30730011 - V1.1
Page 15 / 45