The park assist system(s) are designed to assist you when driving into parking spaces, garages, etc. They utilize
ultrasound sensors located in the bumpers to measure the distance to a vehicle or other object, or a person who may be
close to the front or rear of the vehicle.
When is park assist active
Front: the system is active from the time the engine is started until the car exceeds a speed of approximately 10 mph
(15 km/h). Front park assist is also active when the vehicle is backing up to help simplify parallel parking.
Rear: when the engine is running and reverse gear is selected.
NOTE
If the vehicle is equipped with front and rear park assist, both systems will either be activated or deactivated
together. They cannot be used separately.
When park assist is actively working
1. The audio system's volume will be reduced.
2. An intermittent signal will be audible from the speakers to indicate that you are approaching a person, object,
parked vehicle, etc.
3. The signals begin when the distance between the bumper and the object is:
4. Rear: approximately 5 feet (1.5 meters)
5. Front: approximately 2.5 ft (0.8 meters)
6. At a distance of approximately 1 foot (30 cm), the signal will become constant.
Deactivating park assist
Press the Exit button on the center control panel (see the illustration on
page 72
).
PARK ASSIST DEACTIVATED,
ENTER TO ACTIVATE
will be shown in the display in the center console.
Reactivating park assist
Press the Enter button in the center control panel to reactivate the system. The text
PARK ASSIST ACTIVATED,
EXIT TO DEACTIVATE
will be shown in the display in the center console.
NOTE
It may be necessary to deactivate the park assist system(s) in certain cases.
Содержание 2007 C70
Страница 79: ...Contents Top of Page...