manualshive.com logo in svg

Volvo Penta MD2010, Руководство оператора, Страница: 19 / 64

Поделиться
Скачать
Volvo Penta MD2010 Скачать руководство пользователя страница 19

17

Starting the engine

Make a habit of checking the engine and engine compartment visually before operating the boat. This will help you
to quickly detect anything unusual that has or is about to happen. Also check that instruments and the warning
display are indicating normal values when you have started the engine.

Before starting

●

Open the cooling water intake sea cock.

●

Open fuel cock.

●

Check that there are no fuel, engine coolant or oil leaks.

●

Check oil and engine coolant levels in the engine. See chapter:
Maintenance.

●

Switch on the main switch.

IMPORTANT! Never break the circuit with the main switch while

the engine is running. This could damage the generator.

●

Start the engine compartment fan if one is fitted and let it run for at
least four minutes.

●

Check that there is sufficient fuel.

●

Push in the stop control.

Starting. Instrument panel with ignition lock

WARNING! Never use start spray or similar to start the engine.
Danger of explosion!

1. Move the control lever to the neutral/idle position.

2. Insert the key in the ignition switch. Turn key to the ”I” position. The

three warning lamps come on and can be checked.

Check that the acoustic alarm is operating by pressing the ”Alarm
Test” button.

7741986 - Downloaded from www.volvopenta.com 06/10/2006 13:10:27

Содержание MD2010

































































Отзывы:

Нет отзывов