www.Volumatic.com
25-201679 CE Advanced Configuration Manual Issue 4.0 Feb 2011
Page 6 of 6
* The FlexiCup
supplied with your CountEasy will have already been pre-calibrated.
To enter RESET OPTIONS press the button when the display reads RESET OPTIONS?
To RESET OPTIONS press the button.
The screen will
momentarily read:
DONE
The options will now be reset to the factory default settings.
LOAD CURRENCY?
This menu option allows you to re-load the factory data for the currency being used or to load the data for a
different currency i.e. changing from using the CountEasy to count Sterling to count Euros.
It is important that you are aware that loading a currency will destroy any ‘learning’ that has taken place, any pack
calibration that has been done and any changes that have been carried out to center weights and note and coin
enables.
LOAD CURRENCY however does not affect the ‘OPTIONS’ settings or the calibration of the CUP.
To enter LOAD CURRENCY press the button when the display reads LOAD CURRENCY?
Use the button to scroll through the currency options: STERLING, EURO or USADOLLAR.
To select to change the currency press the button when the required currency is displayed.
The screen will
momentarily read:
PLEASE WAIT
CountEasy will now be set to count the currency you selected.
You should now re-calibrate any PACKS that are to be used.
