202008-481A-ENG
User manual - ARTI 130-2 + T5 Mini + HV640
P15
4. USE OF THE MACHINE (continued)
4.3. SPRAY SETTING
To increase or decrease the product flow-rate, use the wheel (N) at the back of the spray-gun:
- screw to decrease the flow-rate
- unscrew to increase the flow-rate
To increase or decrease the jet width, use the ring (K):
- tighten to obtain a wider jet
- unscrew to obtain a more narrow jet
To obtain differents jets, direct the diffuser head as indicated below:
Head position
Spray render
Vertical flat spray
Horizontal flat spray
Round spray
4.4. SETTING UP OF THE EXTENSION POLE
• The extension pole takes the place of the diffuser head and the jet nozzle.
• Dismantle the ring (K).
• Dismantle the jet nozzle (L2).
• Mount the 1,5 mm needle.
•
Be sure the joint is well placed.
•
Mount the extension pole with the ring (K).
• Block the ring.
4.5. CHANGE OF THE ATOMIZATION KIT
• Remove the ring (K) and the diffuser head (L1).
•
Unscrew the setting wheel (N) and remove the spring.
• Press the trigger, the needle (L3) comes out easily from its housing.
•
Unscrew the jet nozzle using the key delivered with the spray-gun.
•
Reassemble the new nozzle jet and screw properly to avoid leaks.
•
Reassemble the spray-gun in the reverse order of the disassembly, with the new diffuser head.
Changing of the atomization kit, verify that the jet nozzle and the needle have the same
diameter.
