39 (48)
ENG
Intended use
This product is intended to be used for
sawing straight and curved cuts as well as
miter cuts up to 45º on angular workpieces
of plastic, wood and light metal. Use the
product only in the manner and for the uses
described here. All other uses and changes
to the product are outside the limits of the
prescribed use and involve significant risks.
The manufacturer is not liable for damages
that occur due to improper use. The prod-
uct should not be used professionally. Only
intended saw blades may be used.
Package contents
1 Cordless jigsaw
1 Rip fence
3 Saw blades (2x HCS wood,1x HSS metal)
1 Adapter for dust extraction
1 Anti-splinter guard
1 Transport case
1 Operating instructions
Battery and charger are purchased separately
Technical data
Jigsaw
Rated voltage:
20V
Stroke rate:
n
0
800-3800/min
Stroke length:
26mm
Mitre angles:
0° / 22,5° / 45°
Weight with 2Ah battery: 2kg
Recommended battery, Voltgear 6500500
Rated voltage:
20V
Capacity: 2,0Ah
Recommended charger, Voltgear 6500510
Input
Rated voltage:
230-240V ~50Hz
Power: 65W
Fuse:
3,15A
Output
Rated voltage:
21,5V
Rated current:
2,4A
Charging time:
60min (2Ah battery)
Safety class:
II/
Noise emmission value:
Sound pressure level: L
PA
= 86,97 dB (A)
Uncertainty sound K
PA
= 5 dB (A)
Sound power level: L
WA
= 97,97 dB (A)
Uncertainty sound: K
WA
= 5 dB (A)
Vibration emmission value:
Sawing in wood:
a
h.B
: 5,326 m/s
2
Uncertainty vibration: K= 1,5 m/s
2
Sawing in metal:
a
h;M
: 5,614 m/s
2
Uncertainty vibration: K= 1,5 m/s
2
The vibration emission values and the noise
emission values specified in these instruc-
tions have been measured in accordance
with a standardised test procedure EN
62841-2-11:2016 and can be used for com-
paring the power tool with another power
tools. The specified total vibration values
and the noise emission values can also be
used to make a provisional estimate of the
load.
NOTE
NOTE
Depending on the manner in which the
power tool is being used, and in particular
the kind of workpiece being worked, the
vibration and noise emission values can
deviate from the values specified in these
instructions during actual use of the power
tool.Try to keep the vibration load as low as
possible. Measures to reduce the vibration
load are, e.g. wearing gloves and limiting
the working time. Wherein all states of op-
eration must be included (e.g. times when
the power tool is switched off and times
where the power tool is switched on but
running without load).
WARNING!
Use ear protection!
Содержание 7330027147888
Страница 48: ......
