Installation Instructions – 2-Way
To control another light switch as a 2-Way switch, make sure that on the
other switch there is a Voltex Smart Touch module. Select one of the buttons
that has no wiring connected behind it and when pairing it to the mobile
application select 2-Way switch.
Once the switch has been paired as above then you are able to control the
switch by selecting the physical button or through the mobile application.
In the same way, any switch button that is not connected to a lamp can be
set as a scenario.
The two types of scenarios are:
Group Scenario
-
means that all the switches are turned On, then Off, then
On again each time you press on the physical scenario button or On the
scenario icon in the App.
Regular Scenario -
means that all the selected switches are brought to a
particular state or level. You can select this level when creating the regular
scenario, by choosing
On/Off
, dimming % or opening/height %.
If the selected state has been implemented, pressing on the button again
causes no changes.
