1.
This switch cover offers a clean and fresh
look. Backlit and touch-enabled, ideal for
your new smart home and suitable for
use in conjunction with a standard
wall box.
2.
No need for any extra wiring or a neutral
wire and no need for changes to the
existing electrical infrastructure. By using
the mobile App each switch may be set
up as an On/Off switch, a dimmer switch,
a 2-Way switch, a timed switch option or
a favourite scenario switch.
3.
The length of transmission of each
command is less than 2 milliseconds and
uses a very low power level. Transmissions
only occur when a command is initiated.
The amount of data consumed is also
very low for these transmissions and
commands.
4.
The switch continues to work even if the
internet goes down or if the router or
Central Unit goes off.
5.
Every time a paired light switch is
triggered, the most optimal timing
system, called Zero Cross Technology, is
implemented to complete the process.
This is to protect and extend the lifespan
of the electrical lamps and fittings that
are connected.
6.
A sensor, fitted into the module, allows
the system to get an accurate reading
of the electrical current consumption
of each paired switch. The sensor also
functions as an overload protector and
shuts off the load in case of an over-
current.
Versatility is the key to bringing your home to life. Instantly make your home a
smart home with our wirelessly brilliant technology! The Voltex Smart Touch
Triple Switch, enables scheduled switching, as well as the creation of unique
customised scenarios from the comfort of your home or directly from your
smart device when you are not homebound.
Using patent protected innovative technology, the system is installed quickly
and no rewiring or wall drilling is required.
Upgrade your living standards in a matter of hours!
