10. BATTERY CHARGER MODE - TWO STAGE CHARGER
When the unit is set in Charger Mode, LED Displays
and the charger icon
will be lit up to
confirm the Charger is in operation.
Bulk Charge is set at constant current of 20A and voltage at 14.3V. Float Charge voltage is set at 13.6V.
The Charger Icon flashes in Bulk Charge and becomes constant in Float Charge.
Quick press the SET button to display charging Voltage and Current.
Please note that when the battery is full and the float charge current is less than 1A, the current display
shows
11. DISPLAY INDICATION
Low Current Display when the output current is less than 1 Amp
CHARGER Mode
SELECTION (programmable) Mode. Ready for programming of output voltage &
charger mode
REMOTE CONTROL DISABLED, there is always output when input is powered up
FACTORY DEFAULT SETTINGS ENABLED (see section 12 for default settings)
Flashing = Bulk Charge, Solid = Float Charge
