2. Installation Location:Physical requirements for installation
Condition
Description
The unit is intended for use in a dry location. Do not allow water
or other fluids to drip or splash on the charger. Do not mount
the charger in an area subject to rain, spray or splashing bilge
water.
Do not expose the charger to metal filings or any other form
of conductive contamination. The presence of conductive
contamination can cause damage and void your warranty.
For best performance, the ambient air temperature should be
between 5°F (-15°C) and 113°F (45°C)- the cooler the better.
At higher ambient temperatures, the output current will be
automatically reduced to protect the charger from high internal
temperatures.
Dry
Clean
Cool
Ventilated
Allow at least 4 inches (10 cm) of clearance around all sides
of the charger for air flow. Ensure that the ventilation openings
on the unit are not obstructed. If mounting in a compartment,
ventilate the compartment with louvres or cut-outs to prevent
overheating.
Close to AC
junction box
Avoid the use of extended wire lengths if possible.
Close to
batteries
Avoid excessive cable lengths and use the recommended
wire lengths and sizes. Undersized or overly long cables may
affect charging accuracy.
Safe
Working in the vicinity of lead-acid batteries is dangerous.
Batteries generate explosive gases during normal operation.
It is safest not to install electrical equipment in these areas.
4
IMPORTANT
This product is best mounted in a Horizontal position.
If the unit is mounted in a vertical position,
The cooling fan must be at the bottom of the unit.
Maintenance
You should clean the exterior of the unit periodically with a dry
cloth to prevent accumulation of dust and dirt.
At the same time, tighten the screws on the DC input terminals.
