26
Individual operation
In individual mode, you can connect and adjust both outputs independently of each other. This function
allows operation with 2 different output voltages.
Disconnect consumers connected to output A and B.
Switch on the mains power supply at the power switch (1). The operating display (2) lights up and the
current and voltage display appears on the display.
Set the parameters according to your specifications as described in the chapter “Start-up”.
Verify again that the output voltage has been set correctly.
Connect the positive terminal (+) of the consumer with the red socket “+” and the negative terminal (-) of
the consumer with the blue socket “-” of the respective output (A/B).
Now you can switch on the connected consumer.
☞
The current consumption of the connected consumer is displayed in amperes in the
power display (A).
