VOLTCRAFT V-CHARGE 50, Руководство по эксплуатации

Страница: 5 / 48

5
3. INTENDED USE
The charger is used to charge and discharge rechargeable batteries of the type NiMH/NiCd (1 - 15 cells),
LiPo/LiIon/LiFe (1 - 6 cells) and lead acid batteries (1 - 10 cells, 2 V - 20 V).
The charge current can be set between 0.1 A and 7.0 A (depending on the cell number/ rechargeable battery volt-
age). The maximum charging power is 50 W.
The discharge current can be set between 0.1 A and 2.0 A (depending on the cell number/ rechargeable battery
voltage). The maximum discharging power is 5 W.
The charger is operated by four operating buttons and a two-line lit LC display.
The charger also offers a connection for an external temperature sensor (not enclosed, available as an accessory)
for rechargeable battery monitoring. A balancer is integrated for multi-cell rechargeable lithium batteries; for this, the
charger provides different connection sockets for 2 - 6-cell rechargeable batteries with XH-balancer plug.
The charger has an integrated mains unit to permit operation on mains voltage (100 - 240 V/AC, 50/60 Hz). The
charger may, however, also be alternatively operated on a stabilised direct voltage of 11 - 18 V/DC (e.g. via an
external vehicle lead battery or a suitable mains adapter).
The safety notes and all other information in these operating instructions always have to be observed!
Read the operating instructions carefully and attentively, and keep them for later reference. Only pass the product
on to any third parties together with the operating instructions.
Use other than that described above can lead to damage to the product and may involve additional risks such as,
for example, short circuits, fire, electrical shock etc. The entire product must not be modified or converted, and the
casing must not be opened!
This product complies with the statutory national and European requirements.