VOLTCRAFT IPC-1, Руководство по эксплуатации

Страница: 23 / 48

23
Table 7. Various displays in Test Mode
Various displays (toggled by pressing DISPLAY key)
Stage in Test
mode
Voltage (V) Current (mA) *Time (hh:mm)
Capacity
(mAh/ Ah)
During charging Charging current
Charging time
elapsed
“--- mAh”
During
discharging
Discharging
current
Discharging time
elapsed
“--- mAh”
During 2nd
charging
Charging current
2nd charging time
elapsed
Capacity of the
battery
determined in
discharging
Full stage
Instantaneous
Battery voltage
Trickle charging
current
Discharging time
elapsed
Capacity of the
battery
determined in
discharging
Note:
z
*The timer will be resumed and counted from 00:00 again after the time elapsed is longer
than 20 hours. (For example, 1:45 will be shown after the battery has been refreshed for 21
hr and 45 min.)
z
In case the power source is shortly interrupted or terminated when the charger is being
operated, the operational mode will automatically be set to “Charge mode at 200 mA” to
charge up the battery once the power source is back to normal, regardless the operating
mode (Charge, Discharge, Refresh or Test) which has been selected by user before.
THE SIZE C AND SIZE D BATTERY ADAPTERS (FREE ACCESSORY)
The battery adapters are used for connecting the AA battery to the electric devices requiring
Size C or D batteries. To apply the adapter:
1. Install the AA battery to Size C or Size D adapter as below.
2. Ensure the polarity is correct and the assembling condition is good.
Note:
z
User shall stop using the adaptor when there are any cracks or damages observed in the
adaptor, and in case undesired smell comes out while applying the adapter in certain kinds
of electric device.
The AA battery used
with the Size C adapter The AA battery used with the
Size D adapter (it is required to
place the battery into the “C”
adapter first and then the “D”
adapter)