VOLTCRAFT B6 Duo, Руководство по эксплуатации

Страница: 88 / 208

88
• With the “INC” button, you access the next setting (or with the button “DEC” the previous
setting or return to the main menu with the button “TYPE/STOP”.)
In this menu, you can activate/deactivate the temperature monitoring function as well as
set the corresponding temperature at which the safety cut-off kicks in.
¼
An external temperature sensor is required to use this function, which is connected
to the charger (see chapter 8, position 9).
Confirm the selection by pressing the “ENTER/START” button. “ON” or “OFF” blinks on
the display.
You can activate (“ON”) or deactivate (“OFF”) the temperature monitoring function with
the buttons “INC” or “DEC”.
Confirm the setting by pressing the “ENTER/START” button.
The temperature now flashes in the display (display in °C = “C” and °F = “F”). With the
buttons “INC” or “DEC”, you can set the temperature at which a subsequent charge or
discharge process is later terminated.
Save the setting by briefly pressing the “ENTER/START” button.
• With the “INC” button, you access the next setting (or with the button “DEC” the previous
setting or return to the main menu with the button “TYPE/STOP”.)
The battery may become quite hot using the cycle program (automatic charge/discharge
cycles in sequence). In order to give the battery enough time to cool off sufficiently, a
break time can be set here.
Briefly press the button “ENTER/START”. The time then begins to flash. With the buttons
“INC” or “DEC”, you can select the time (1 to 60 min). Save the setting with the button
“ENTER/START”; the time stops blinking.
Waste Time Waste Time Waste Time Waste Time Waste Time
CHG>DCHG 1min
CHG>DCHG 1min CHG>DCHG 1min CHG>DCHG 1min CHG>DCHG 1min
Temp Cut-Off Temp Cut-Off Temp Cut-Off Temp Cut-Off Temp Cut-Off
ON 80C 176F
ON 80C 176F ON 80C 176F ON 80C 176F ON 80C 176F