VOLTCRAFT B6 Duo, Руководство по эксплуатации

Страница: 83 / 208

83
14. SAVING BATTERY DATA
The charger has altogether 10 memories in which you can save battery data/settings.
• In the main menu, select the function “SAVE DATA” with the button “TYPE/STOP”:
• Press the button “ENTER/START”; the display shows the following, for example, and
memory “01” flashes:
• Select the desired memory slot with the buttons “INC” or “DEC” (1...10) and confirm your
entry with the button “ENTER/START”.
• Now the battery type, which you can change with the buttons “INC” or “DEC” blinks on
the top right of the display. Confirm the selection by pressing the “ENTER/START”
button.
¼
It is not possible to select between “LiPo”, “LiIon” and “LiFe”. The type set in the user
menu (see chapter 16) is always applied.
• The voltage starts to blink on the bottom left. Change this as usual using the buttons
“INC” and “DEC” and confirm the value using the “ENTER/START” button.
• Now the battery capacity blinks on the bottom right. Set this with the buttons “INC” or
“DEC” (keep button depressed for longer for fast changing) and confirm this with the
button “ENTER/START”.
• Then the memory slot number blinks again.
• Keep the button “ENTER/START” depressed for approx. 3 seconds to access the next
menu, then let the button go again immediately. The following display appears (depend-
ing on the previously selected battery type):
¼
Please note: If you keep the button “ENTER/START” pressed too long , the display
shows “SAVE” and the settings are saved. In this case, just restart setting.
PROGRAM SELECT PROGRAM SELECT PROGRAM SELECT PROGRAM SELECT PROGRAM SELECT
SAVE DATA
SAVE DATA SAVE DATA SAVE DATA SAVE DATA
SAVE [01] LiPo SAVE [01] LiPo SAVE [01] LiPo SAVE [01] LiPo SAVE [01] LiPo
3.7V 2000mAh
3.7V 2000mAh 3.7V 2000mAh 3.7V 2000mAh 3.7V 2000mAh
NiMH CHARGE At* NiMH CHARGE At*
NiMH CHARGE At* NiMH CHARGE At*
NiMH CHARGE At*
CUR LIMIT 4.0A
CUR LIMIT 4.0A
CUR LIMIT 4.0A CUR LIMIT 4.0A
CUR LIMIT 4.0A
LiPo CHARGE * LiPo CHARGE * LiPo CHARGE * LiPo CHARGE * LiPo CHARGE *
1.0A 7.4V(2S)
1.0A 7.4V(2S) 1.0A 7.4V(2S) 1.0A 7.4V(2S) 1.0A 7.4V(2S)