VOLTCRAFT AO-610, Руководство пользователя

Страница: 4 / 16

3
dangerous and should be strictly avoided.

Take care not to allow water to get into this instrument. The use of this instrument in a wet
state could result in electrical shock or fire. If water or other foreign matter has penetrated
this instrument, first switch the power off, remove the power cord and call for repair.

Do not place this instrument on an unstable or slanting surface . The dropping or turning
over of this instrument could result in electrical shock, injury or fire. If this instrument has
been dropped or its cover has been damaged, switch the power off, remove the power cord
and call for repair.

Do not allow any foreign matter such as metal or inflammable substance to get into the
instrument via the air holes. The penetration of any foreign matter from the ventilation
holes could result in fire, electrical shock, or power failure.

Use this instrument with the rated AC power source. Use of this instrument with a voltage
other than specified could result in electrical shock, fire or power failure. The usable
power voltage range is marked on the rear panel.

Do not remove either the cover or panel.

Take sufficient care when measuring high voltages.

Do not modify this instrument.

Avoid use of damaged cables .
2. SPECIFICATIONS
2.1 VERTICAL SYSTEM
Sensitivity
5mV/DIV. ~5V/DIV ± 3%
Trimming Ratio 2.5:1
Rise Time 35ns
Bandwidth(-3dB) DC:0~10MHz AC:10Hz~10MHz
Input Impedance
1M
Ω ±
3%,30 pF
±
5pF
Max. Input Voltage 400V pk
2.2 TRIGGER SYSTEM
Trigger Sensitivity Int 1 div., Ext 0.3V
Ext. Trigger Input Impedance
1M
Ω
30pF
Ext. Trigger Max. Input Voltage 400Vpk
Trigger Sources Int, Line, Ext
Trigger Mode Norm, AUTO, TV
2.3 HORIZONTAL SYSTEM
Sweep Time
0.1S / DIV ~0.1
µ
S / DIV
±
3%
Trimming Ratio 2.5:1