7.3 Charging your devices
D
You have checked that the specifications of the power bank match the specification of your
device. Refer to the section “Technical data”.
1. Connect a device to the power bank.
2. Press the power button to start charging.
3. Disconnect the charging cable when charging has completed.
Note:
– If the power bank overheats, the over-temperature protection function will automati-
cally stop charging/discharging and all 4 LED indicators will flash.
– Charging/discharging resumes when the power bank temperature drops to 10 °C be-
low the temperature protection limit.
8 Troubleshooting
Problem
Possible cause
Suggested solution
Cannot charge a con-
nected device.
Power bank battery is flat.
Recharge the power bank.
Cannot charge the pow-
er bank (LED indicator
is not flashing).
The output voltage of the
power adaptor is too low.
Use a suitable power adaptor. See
section “Technical data”.
Faulty cable.
Check the cable and connection.
Replace the cable if needed.
9 Cleaning and care
Important:
– Do not use aggressive cleaning agents, rubbing alcohol or other chemical solutions.
They damage the housing and can cause the product to malfunction.
– Do not immerse the product in water.
1. Disconnect all devices from the power bank and the power bank from the power supply.
2.
Clean the product with a dry, fibre-free cloth.
10 Disposal
This symbol must appear on any electrical and electronic equipment placed on the
EU market. This symbol indicates that this device should not be disposed of as
unsorted municipal waste at the end of its service life.
Owners of WEEE (Waste from Electrical and Electronic Equipment) shall dispose
of it separately from unsorted municipal waste. Spent batteries and accumulators,
which are not enclosed by the WEEE, as well as lamps that can be removed from
the WEEE in a non-destructive manner, must be removed by end users from the
WEEE in a non-destructive manner before it is handed over to a collection point.
Distributors of electrical and electronic equipment are legally obliged to provide free take-back
of waste. Conrad provides the following return options
free of charge
(more details on our
website):
in our Conrad offices
at the Conrad collection points
at the collection points of public waste management authorities or the collection points set
up by manufacturers or distributors within the meaning of the ElektroG
End users are responsible for deleting personal data from the WEEE to be disposed of.
It should be noted that different obligations about the return or recycling of WEEE may apply in
countries outside of Germany.
11 Technical data
11.1 Power supply
Rechargeable battery type ........... Lithium-ion
Capacity ........................................ 26800 mAh, 3.6 V, 96.48 Wh
Input voltage/current ..................... 5 V/3 A, 9 V/3 A, 12 V/2.5 A, 15 V/2 A, 20 V/1.5 A
Output voltage/current .................. USB-C™:
5 V/3 A, 9 V/3 A, 12 V/3 A, 15 V/3 A, 20 V/3 A (max. 60 W)
PPS: 3.3 - 11 V/3 A, 3.3-21 V/3 A (total: 60 W)
USB-A 1/2: 5 V/3 A, 9 V/2 A, 12 V/1.5 A
USB-A 1&2: 5 V/3.4 A (max. 78 W)
Total output ................................... 5 V/ 3 A (USB-A and USB-C™)
Charging time (empty to full) ........ approx. 4.5 hours (with PD 30 W supply)
approx. 9 hours (with non-PD supply)
Recharge cycles ........................... >300 times
11.2 USB Ports
Input/output................................... 1x USB-C™ (QC 3.0 & PD 3.0)
Output ........................................... 2x USB-A (QC 3.0)
11.3 Other
Indicators ...................................... 4 LEDs
Protection ..................................... Short circuit, overcharge, over discharge, overheat
Operating conditions .....................
0 to +35 ºC, ≤80 % RH (non-condensing)
Storage conditions ........................
0 to +30 ºC, ≤80 % RH (non-condensing)
Dimensions ...................................
190 x 87 x 24 mm (L x W x H)
Weight .......................................... 670 g
This is a publication by Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau (www.conrad.com). All rights in
-
cluding translation reserved. Reproduction by any method, e.g. photocopy, microfilming, or the capture in electronic data
processing systems require the prior written approval by the editor. Reprinting, also in part, is prohibited. This publication
represents the technical status at the time of printing.
Copyright 2022 by Conrad Electronic SE. *2588045_V1_0722_02_mxs_m_en_(2)
