VOLTCRAFT 2203066, Руководство пользователя

Страница: 14 / 17

2.Quick Start
12
shown, you can still save current reading by pressing the key.)
Note:

When the recording data exceeds the current range, the data will be marked as
"overload".

When the relative operation is turned on, the recorded data will still be the original
readings without relative operation.
3. Clear the manual record
: Press the Clear softkey to clear current manual record.
(Note: The auto record data will also be cleared, since they share the same data
table.)
Auto Record
1. Configure the parameters : Press the front panel key, press the Auto softkey.
Press the Point softkey to specify the total number of readings to record. The range is
1 to 1000.
Press the Interval softkey to specify the time interval between readings. The range is
15 ms to 9999.999 s.
2. Record data : Press the Start softkey to start auto record. The icon will show up
on the top of the display. Press the End softkey to stop recording, the recorded
readings will be displayed in the data table. Press keys to turn the page.
Note :

The measurement function can be switched during auto record.

In auto range, the relay switch may cause jitter, the data at this time is invalid. It