VOLTCRAFT 1556754, Руководство по эксплуатации

Страница: 33 / 40

Use button 1 (channel) to select the charging output (CH1-CH4) that the battery is connected to.
Use buttons 2 (DEC-) and 3 (INC+) to adjust the maximum charging current between 0.1 A and
1 A in 0.1 A increments. After setting the maximum charging current, press button 4 (START/
STOP) for 2 seconds to start the charging process.
Press button 4 (START/STOP) to stop the charging process.
When the battery is charging, the display for each channel alternates between the maximum
current and voltage every 5 seconds.
The charger must be placed on a dry, level surface. The ventilation holes must not be
obstructed. Rechargeable batteries generate heat when they are charging/discharg-
ing. The heat must be dissipated by a suitable cooling system. Excessive battery
temperatures can raise the risk of a fire and cause the batteries to age more quickly.
Remove the battery from the charger when the charging process is complete.
After charging the battery, remove it from the charger, otherwise it will automatically
start to discharge. Constantly charging and discharging the battery will cause it to age
more quickly.
Before changing the maximum charging current, press button 4 to stop the charging
process.
9. Error messages
Error message Beep LED
indicator
Switch
position
Description
Error 1 (ERR1) Overvoltage
Error 2 (ERR2) Defective power supply
Error 3 (ERR3) Excessive charger tem-
perature
Error 4 (ERR4) Excessive current
Error 5 (ERR5) Constant Alternating
red/green
LiPo or
LIHV
No battery was detected on
this channel.
Error 6 (ERR6) Incorrect battery polarity
Error 7 (ERR7) Excessive battery voltage
33