• Disconnect the product from the mains socket when you are not using it.
•
The product generates heat during use. Ensure that there is sufficient ventilation and do not
cover the product during use.
• Never short-circuit a USB output.
• The mains socket that the device is plugged into must be easily accessible.
• Only connect the power adapter to a normal mains socket connected to the public supply.
• Before plugging in the power adapter, check whether the voltage stated on the power adapter
complies with the voltage of your electricity supplier.
• Never connect or disconnect power adapters if your hands are wet.
• Make sure that the cable is not squeezed, bent, damaged by sharp edges or put under
mechanical stress.
• Always lay the cable so that nobody can trip over or become entangled in it. This poses a
risk of injury.
• For safety reasons, disconnect the power adapter from the mains socket during storms.
• If the wall plug transformer is damaged, do not touch it; there is danger to life from electric
shock! First, switch off the mains voltage to the mains socket to which the wall plug transformer
is connected (switch off at the corresponding circuit breaker or remove the safety fuse, then
switch off at the corresponding RCD protective switch, so that all poles of the mains socket are
disconnected). You can then unplug the wall plug transformer from the mains socket. Dispose
of the faulty wall plug transformer in an environmentally friendly way; do not use it any more.
Replace it with a wall plug transformer of the same design.
•
Never pour any liquids over electrical devices or put objects filled with liquid right next to the
device. If liquid or an object enters the interior of the device nevertheless, first power down the
respective socket (e.g. switch off circuit breaker) and then pull the mains plug from the mains
socket. Do not operate the product anymore afterwards, but take it to a specialist workshop.
• Never use the product immediately after it has been brought from a cold room into a warm
one. The condensation generated could destroy the product. There is also a risk of a fatal
electric shock! Allow the product to reach room temperature before connecting it to the power
supply and putting it to use. This may take several hours.
Operation
Ensure that the connection specifications for your USB device comply with the
connection data for the product (see technical data).
Always turn off the USB device that you want to connect before connecting it to the
USB connection.
Ensure that the product is connected properly. If it is not connected properly, it may
become hot or cause an electric shock or fire.
• Turn off your USB device and connect it to the USB socket on the product using the USB cable.
• Insert the mains plug into a normal household mains socket. The working voltage is 100 - 240 V/AC.
• The product delivers a current to the connected device via the USB cable.
• Always turn the USB device off before unplugging it from the power adapter.
• Remove the USB power supply unit from the mains socket after use.
Care and cleaning
• Always unplug the product from the mains socket before cleaning it.
• Never use aggressive detergents, rubbing alcohol or other chemical solutions, as these could damage the
casing or even impair the functioning of the product.
• Use a dry, lint-free cloth to clean the product.
Disposal
Electronic devices are recyclable waste and must not be disposed of in the household waste.
At the end of its service life, dispose of the product according to the relevant statutory regulations.
You thus fulfil your statutory obligations and contribute to the protection of the environment.
Technical data
Input voltage/current ...........................100 - 240 V/AC, 50/60 Hz, max. 0.32 A
Output voltage/current ........................5 V/DC, 2,5 A
Short circuit protection ........................< 2 W (when shielded)
Overload protection ............................Max. 3.1 A
Cable length .......................................1 m ±50 mm (D+, D- shorted)
Operating conditions ...........................0 to +40 °C, 10 – 95 % RH (non-condensing)
Storage conditions ..............................-20 to +55 °C, 5 – 95 % RH (non-condensing)
Dimensions (W x H x D) .....................63 x 46 x 24 mm
Weight ................................................70 g
Operating instructions
SP-5C power adapter for Raspberry
®
Pi 3
Item no. 1462834
Intended use
This product is designed to operate a USB device with a micro USB port, e.g. a Raspberry
®
Pi 3 computer.
Power is supplied via a normal household mains socket. The product is protected against overload and
short circuits.
It is intended for indoor use only. Do not use it outdoors. The product must not come into contact with
moisture, e.g. in a bathroom, or with rain or other similar liquids.
For safety and approval purposes, you must not rebuild and/or modify this product. If you use the product
for purposes other than those described above, the product may be damaged. In addition, improper use can
cause hazards such as short circuiting, fire, electric shock etc. Read the instructions carefully and keep them.
Make this product available to third parties only together with its operating instructions.
This product complies with the statutory national and European requirements. All company names and
product names are trademarks of their respective owners. All rights reserved.
Delivery content
• Power adapter
• Operating instructions
Up-to-date Operating Instructions
Download the latest operating instructions at www.conrad.com/downloads or scan the QR code above.
Follow the instructions on the website.
Meaning of symbols
The symbol with the lightning in the triangle is used if there is a risk to your health, e.g. due
to an electric shock.
The exclamation mark indicates specific risks associated with handling, function and use.
The “arrow” symbol indicates special tips and operating information.
The product must only be used and operated in dry, enclosed indoor areas. The product must
not become damp or wet, otherwise there is a risk of a fatal electrical shock!
This symbol indicates that this product is built according to protection class II. It is equipped
with reinforced or dual insulation between the mains circuit and the output voltage.
Safety instructions
Read the operating instructions carefully and especially observe the safety information.
If you do not follow the safety instructions and information on proper handling in this
manual, we assume no liability for any resulting personal injury or damage to property.
Such cases will invalidate the warranty/guarantee.
a) General information
• The device is not a toy. Keep it out of the reach of children and pets.
• Do not leave packaging material lying around carelessly. This may become dangerous playing
material for children.
• Protect the product from extreme temperatures, direct sunlight, strong jolts, high humidity,
moisture, flammable gases, vapours and solvents.
• Do not place the product under any mechanical stress.
• If it is no longer possible to operate the product safely, take it out of operation and protect it
from any accidental use. Safe operation can no longer be guaranteed if the product:
- is visibly damaged,
- is no longer working properly,
- has been stored for extended periods in poor ambient conditions or
- has been subjected to any serious transport-related stresses.
• Please handle the product carefully. Jolts, impacts or a fall even from a low height can damage
the product.
• Also observe the safety and operating instructions of any other devices which are connected
to the product.
• Consult an expert when in doubt about the operation, safety or connection of the device.
•
Maintenance, modifications and repairs are to be performed exclusively by an expert or at a
qualified shop.
• If you have questions which remain unanswered by these operating instructions, contact our
technical support service or other technical personnel.
b) Persons/Product
• Never leave the product and the connected device unattended during use.
• Always turn off the connected device before connecting and disconnecting the product from
the mains .
• Unplug the connected USB device from the product when you are not using it.
This is a publication by Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau (www.conrad.com).
All rights including translation reserved. Reproduction by any method, e.g. photocopy, microfilming, or the capture in
electronic data processing systems require the prior written approval by the editor. Reprinting, also in part, is prohibited.
This publication represent the technical status at the time of printing.
Copyright 2016 by Conrad Electronic SE.
*1462834_v1_0716_02_DS_m_4L_(1).indd
