VOLTCRAFT 101719, Руководство по эксплуатации

Страница: 27 / 74

27
9.5 determination of the Shape of the flow Channel
In setup mode, push “Unit ” or “Unit ”, until “duct shape” appears in the lower area of the display.
Push “Avg/Rec” to conform your selection.
Use the buttons “Unit ” or “Unit ” to select the round or square icon for a rectangular or round flow channel.
Push “Avg/Rec” to conform your selection.
9.6 Setting the flow Channel Parameters
rectangular flow Channel
If the flow channel is rectangular, the display first shows “W=” and a number that indicates the
width of the channel in the selected measuring units.
Display “DECI”: Push “Unit ” or “Unit ”, to determine the position of the decimal point.
Push “Save/Clear” to switch between decimal points – the currently selected number flashes.
“Unit ” or “Unit ” can now be used to set the individual numbers according to your wishes
(0 … 9).
Push “Avg/Rec” to conform your selection.
The display now switches to “H=” and shows the height of the channel in the desired measur-
ing unit.
Display “DECI”: Push the “Unit ” or “Unit ”, to determine the position of the decimal point.
Push “Save/Clear” to switch between decimal points – the currently selected number flashes.
“Unit ” or “Unit ” now can be used to set the individual numbers according to your wishes
(0 … 9).
Push “Avg/Rec” to confirm your selection and save the settings.