Step 5: Tightly Connect the AC Port of the BENY Microinverter with the AC Bus
Connector
Step 6: Install the Waterproof Protective Cover on the End of the AC Bus and the
Unused Female Connector (Skip If Not)
Step 7: Connect the Solar Modules, Connect Each BYM550 to the PV Modules
-Each Beny Microinverter has two removable serial number labels located on the case.
-Tear off one of the serial number labels and stick it to the corresponding position on the Beny
system installation diagram, and peel off the other serial number label and stick it on the
frame of the solar module for easy viewing.
-You can scan the label with your mobile phone to complete the addition and configuration of
the micro-inverter in the
VOLTACON
Micro-Inverter APP.
Step 8: Complete the Installation Diagram of
VOLTACON
Microinverter System
The installation diagram of Micro inverter system refers to the schematic diagram of the
physical location of each microinverter in the solar system. Customers can use the blank
diagram in the appendix of this manual to record the installation position of the microinverter in
their own system, or they can Draw the system installation diagram yourself.
c
2022
VOLTACON