VOLTA Ultima Pet Plus U6011, Инструкция по эксплуатации

Страница: 3 / 5

GETTING THE BEST CLEANING RESULTS
Your Volta is equipped with a number of different
nozzles and accessories. Read below to learn more.
Combination floor nozzle
ideal for cleaning both carpets and hard floor types.
When cleaning carpets, the brush strip should be in
the retracted position. Press the pedal on the top of
the nozzle. When cleaning hard floors, release the
pedal to lower the brush strip for soft cleaning.
Hard floor nozzle
Use the hard floor nozzle for larger hard floor
areas to ensure gentle, scratch free cleaning.
Turbo nozzle
The turbo nozzle features an air driven brush roll which
makes it ideal for efficient cleaning of carpets, and is
particularly suited to removing pet hair.
Small accessories:
Crevice nozzle
Best used for cleaning in corners, between furniture
and tight spaces.
Upholstery nozzle
This nozzle is ideal for loose fabrics, curtains
and upholstery.
Dusting brush
For above floor cleaning of hard surfaces, such as
table tops, benches and shelves.
GETTING STARTED,
ASSEMBLING YOUR VOLTA
always be sure to fully assemble the vacuum cleaner
before plugging it into the power outlet.
1. insert flexible hose into the air intake duct on the top
of appliance. Press until it clicks into position.
To release the flexible hose, press firmly the two
release buttons on the hose sleeve and remove the
hose from the air intake duct.
FITTING THE TELESCOPIC ExTENSION TUBE
AND ACCESSORIES
1. Fit the telescopic extension tube to the
bent end handle.
2. Fit the floor nozzle to the telescopic
extension tube.
4. 3.
READY TO CLEAN
1. Before using this appliance, unwind a sufficient
length of cable and insert the plug in to the power
outlet. a yellow mark on the power cable shows the
ideal cable length. Don’t extend the cable beyond
the red mark.
2. Press the ON/OFF switch pedal to start
the appliance.
3. To rewind the power cable, press the rewind
pedal with one hand and guide the cable with
the other hand to ensure that it does not whip
causing damage.
4. adjust the power control knob to regulate
the suction level as required.
ASSEMBLING THE VACUUM CLEANER INSTRUCTIONS FOR USE / MAINTENANCE
IMPORTANT MAINTENANCE TIPS
Your Volta is designed to provide efficient cleaning
performance. Be sure to follow the below simple steps
to ensure you get the best performance possible for
years to come.
CHANGING THE BAG
always operate the cleaner with paper or cloth dust
bag installed. if you forget to attach the dust bag or
attach it in the wrong manner, the dust cover may
not close properly.
1. after removing the hose, open the front cover.
2. Raise the support of the bag to an upright position.
3. Remove the dust bag.
4. in case of paper bag. Replace the paper bag with
new when it is full or dust bag indicator shows red.
in case of cloth bag
Follow the above steps 1 - 3.
To open, slide the plastic clip off the bag
empty bag and refit the plastic clip
Note: The cloth bag may be washed in lukewarm water
and dried completely. It should not be washed
in washing machine.
5. Close the cover by pressing down
until it is locked.
6. *Note: a cloth bag is not supplied with this
product. To purchase a cloth bag, please return
to the place of purchase or contact electrolux
on 1300 365 305 (aus), 0508 730 730 (NZ).