Volta sleeves are made from tubular extrusions with
standard thicknesses of 2-3mm (the table below shows
the sizes which are defined by inner and outer diameters
I.D. and O.D.) and are cut to length for coating rollers in
situations where a product requires cushioning while moving
across a roller bed or conveyor. Applications include potato
intakes and ceramic tile lines.
The sleeves are extruded from a food approved (FDA/EU),
smooth durable 85A Shore white TPU material to avoid
marking products. Some sizes are available with a ribbed
outer surface. Once cut to length they can be mounted
onto the roller by surface. Can be mounted onto the roller
by means of the Volta Sleeve Mounting Tool which uses
compressed air to inflate the tube dimension enough to
permit the insertion of the roller. Once the air supply is cut off
the tube assumes its original diameter and fits tightly over the
roller – no adhesive is required.
Nomenclature:
The sleeve designation contains two numbers. The first
number is the diameter of the metal roller to be covered. The
second number is the desired outside diameter (O.D.) after
the sleeve is mounted on the roller. For example, a 50x55
sleeve is designed to cover a roller with an outside diameter
of 50mm and the outside diameter of the covered roller
will be 55mm. This identification system is used for both
standard and ribbed sleeves.
Packaging:
Sleeves up to 50x55 mm are in 30m /100 inch rolls.
Sleeves from 60x65 mm are supplied as 3m /10 inch tubes.
Note:
Contact your local distributor for further details regarding the dimensions and availability of Ribbed Sleeves.
Sleeve Dimensions (mm)
10x14
30x35
40x45
50x55
60x65
80x85
90x95
22x27
32x37
40x50
63.5x68.5
85x90
25x30
35x40
42x47
65x73
88.9x94
27x32
38x43
45x50
73x78
48x53
77x82
Non-marking surface protects products
Ribbed and Standard (smooth surface)
Copyright
©
Volta Belting Technology Ltd.
CAT700EN00 - Ver.C - April 2020
Volta Belting makes no warranty with respect to any of its products
for a particular purpose. See Volta General Terms and Conditions.
www.voltabelting.com
CORPORATE
HEADQUARTERS
Sales and Manufacturing
[email protected]
EUROPE
Tel. +31 546 580166
[email protected]
USA
Tel. +1 973 276 7905
Toll Free. 1-877-VOLTAUS
[email protected]
no
w-br
anding.co.il
