Volt VTR-100SL-SS-R1, Руководство по установке

Страница: 9 / 28

Quick Start Guide Steps
1. Read the safety instructions and upack the transformer.
2. Mount the transformer.
3. Run the wires from the transformer location to the fixtures or hubs.
4. Attach all the wires to the transformer terminals. For each paired wire,
attach one side to a common terminal and the other side to the voltage
terminal.
5. Check to ensure all of the connections are secure.
6. Plug in the transformer.
7. Flip the ON/OFF breaker switch upward to power on the transformer.
8. Check that the transformer pilot light and timer pilot light are both on.
9. Turn the timer clockwise to the manual "On" mode.
10. Check to ensure all the fixtures are on and functioning properly.
11. Measure the voltage at the fixtures or hubs.
12. If needed, use another voltage terminal (some transformers only have
one).
13. Set the timer to the desired function.
14. Close the transformer door using the locking mehanism to seal the unit
from weather and debris.
15. At Dusk, make any last minute adjustments to the fixtures. Bury the
wire only after the adjustments have been made.