Volt VTR-100SL-SS-R1, Руководство по установке

Страница: 16 / 28

Attach all of the wires to the transformer. Using the common
and voltage terminals split each wire and fit one side into
the common and one side into the desired voltage terminal
(some transformers will only have one terminal).
1. Feed the wire through the wire slots and into the transformer.
2. Flip up the easy connect lever, which will allow the wire entry.
3. Strip the lead ends of the wires to allow metal to metal
contact within the connector.
4. Slide one side of the wire into the common terminal and one
side into the voltage terminal, then clamp both levers down onto
the wires. Check for a strong connection by firmly pulling on the
wire.
www.voltlighting.com
Quick Start Step 4