Install Bistro String
6
Insert Stake to Ground
5
[email protected] • 813.978.3700
- 9 -
Test Solar Panel
4
Place the solar panel onto a flat
opaque working surface. Press
the ON/OFF switch on the back of
the solar panel to test the light
source. The light will turn on
while the switch is on.
Now you can proceed to next
steps of installations knowing the
fixture is in ON mode.
On/Off Switch
BACK
FLAT SURFACE
Solar Panel
Insert the attachment piece on
the back of the solar panel onto
the holder on the top end of the
support arm.
Support Arm
Solar Panel
Holder
Attachment piece
Pass the guide wire through the holes on the top end of the sockets
and then fix the guide wire to your desired location or tie the bistro
string to applicable locations directly.
Socket
Guide Wire
Bistro String